Load data for .219 Zipper + .224 | 46gr | RWS VMS

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 46gr \| RWS VMS
Manufacturer SKU:	2145847
Bullet Weight:	46gr \| 3.0g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.570" \| 14.5mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.277" \| 7.0mm
Shank Seated Depth:	0.277" \| 7.0mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B5356_C58
Last updated:	2025-01-01

Load data for 44 loads in caliber .219 Zipper with .224 | 46gr | RWS VMS bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	83%	36289	88%	**59	94%
Accurate 2015	<<locked>>	88%	35882	87%	**27	96%
Accurate 2495	<<locked>>	95%	37173	90%	**41	96%
[Accurate 2520]*	<<locked>>	93%	37130	90%	**92	92%
Alliant AR-Comp	<<locked>>	92%	36071	87%	**09	98%
Alliant Reloder-10x	<<locked>>	86%	36898	89%	**79	97%
[Hodgdon H322]*	<<locked>>	89%	37144	90%	**76	94%
[Hodgdon H335]*	<<locked>>	84%	36811	89%	**56	93%
Hodgdon TrailBoss	<<locked>>	97%	30226	73%	**82	100%
IMR 3031	<<locked>>	97%	36289	88%	**19	95%
IMR 4198	<<locked>>	84%	36637	89%	**30	98%
[Norma 202]*	<<locked>>	93%	36550	88%	**59	93%
ReloadSwiss RS 14	<<locked>>	97%	29979	73%	**28	100%
[Rottweil R 901]*	<<locked>>	90%	36956	89%	**33	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	36143	87%	**51	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	35882	87%	**48	94%
[Somchem S335]*	<<locked>>	91%	36042	87%	**64	94%
Vihtavuori N130	<<locked>>	88%	37057	90%	**14	97%
Vihtavuori N133	<<locked>>	94%	36724	89%	**04	96%
[Vihtavuori N135]*	<<locked>>	96%	29660	72%	**69	92%
[Vihtavuori N140]*	<<locked>>	95%	36274	88%	**17	93%
[Vihtavuori N540]*	<<locked>>	95%	36129	87%	**33	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33852	82%	**84	92%
[Accurate 2015]*	<<locked>>	81%	28790	70%	**17	93%
[Accurate 2495]*	<<locked>>	84%	25251	61%	**90	91%
[Accurate 2520]*	<<locked>>	90%	33228	80%	**87	90%
[Alliant AR-Comp]*	<<locked>>	81%	25150	61%	**54	93%
Alliant Reloder-10x	<<locked>>	81%	31952	77%	**38	96%
[Hodgdon H322]*	<<locked>>	82%	29718	72%	**59	90%
[Hodgdon H335]*	<<locked>>	81%	33388	81%	**58	91%
Hodgdon TrailBoss	<<locked>>	81%	23583	57%	**01	100%
[IMR 3031]*	<<locked>>	89%	28355	69%	**66	90%
IMR 4198	<<locked>>	81%	33866	82%	**61	97%
[Norma 202]*	<<locked>>	89%	31662	77%	**15	90%
ReloadSwiss RS 14	<<locked>>	81%	23351	56%	**47	100%
[Rottweil R 901]*	<<locked>>	86%	32111	78%	**02	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	32430	78%	**49	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	90%	29066	70%	**54	90%
[Somchem S335]*	<<locked>>	84%	29269	71%	**77	90%
[Vihtavuori N130]*	<<locked>>	81%	29834	72%	**13	94%
[Vihtavuori N133]*	<<locked>>	82%	25672	62%	**66	90%
[Vihtavuori N135]*	<<locked>>	93%	26861	65%	**67	90%
[Vihtavuori N140]*	<<locked>>	91%	31647	77%	**82	91%
[Vihtavuori N540]*	<<locked>>	92%	32561	79%	**28	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data